RS3 - IP67 8-Port Managed Ethernet Switch

Auto-negotiation

High-speed non-blocking, store-and-forward switching

8K MAC address lookup table with automatic learning and aging

QoS (Quality of Service) support with 4 traffic classes (IEEE 802.1p tagged frames)

Layer 2 switching

Back pressure or IEEE802.3x flow control

Automatic MDI/MDI-X crossover (all ports)

Management Firmware System Features

Saving and restoring user configurations

Software upgrades through TFTP

System logs (syslog) and e-mail alerts for critical events

Remote monitoring (RMON) and alarm generation

Displaying the running configuration in the form of CLI commands

DHCP client, server and relay

Management interfaces through
• CLI (RS232 console, Telnet, SSH)
• SNMP v3
• WebUI (HTTP and HTTPS/SSL)

Switch configuration can be loaded from external dongle

Management Firmware Layer 2 Features

TCP/IP (IPv4, IPv6)

Transparent bridging

QoS (DiffServ) and 802.1p traffic prioritization queuing, polishing, shaping

VLAN-aware bridging with GARP

Static and dynamic VLANs (through GVRP)

Dynamic learning of multicast groups through GMRP

Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure loop free topology formation

Reducing multicast traffic in the network through multicast snooping - IGS (IPv4) and MLDS (IPv6)

IGMP proxy

Aggregating physical ports for increasing bandwidth and redundancy through link aggregation (LACP)

Link Layer Discovery Protocol (LLDP)

SNMP (v1, v2c, v3) agent and MIB support, configuration save/restore

Management Firmware Security Features

User authentication using 802.1x

Controlling management access through SNMP, CLI and web only from authorized managers

MAC based access list (ACL) for traffic filtering

Rate-limiting and storm control to prevent packet flooding from malicious peers

Supported Ethernet Standards

Transparent bridging: IEEE 802.1d, 2004

VLAN: IEEE 802.1q Rev D5.0, 2005

Port based VLANs: IEEE 802.1q Rev D5.0, 2005

GVRP/GMRP support: IEEE 802.1d

Rapid Spanning Tree Protocol: IEEE 802.1d

Multiple Spanning Tree: IEEE 802.1s, IEEE 802.1q Rev D5.0, 2005

IGMP snooping: draft-ietf-magma-snoop-12.txt

MLD snooping: draft-ietf-magma-snoop-12.txt

Link aggregation: IEEE 802.3ad, 2005

Port based authentification with EAP: IEEE 802.1x - REV2004

Link Layer Discovery Protocol: IEEE 802.1ab, 2005

Priority based switching: IEEE 802.1p

Service Interface

M12 connector at front

RS 232 / V24

I²C interface for external dongle

Front I/O

8 Ethernet ports via M12 connectors

1 service interface via M12 connector

1 power input via M12 connector

Link and activity Ethernet status LEDs (2 per channel)

Status LEDs for power, reset and error codes

Electrical Specifications

Power input
• Nominal input voltage 24 VDC (9 to 36 V) according to EN50155

EN50155 power interruption class S2

Isolation (according to EN50155)
• 1,500 Vrms

Power consumption: 5 W

Mechanical Specifications

Dimensions: 220 mm x 130 mm x 70 mm (without connectors)

Prepared for wall or DIN-rail mounting with special mounting plates (available separately)

Weight: 1.9 kg

Environmental Specifications

Temperature range (operation):
• -40..+70°C (+85°C) with up to 85°C for 10 minutes according to class Tx (EN50155)
• Airflow: natural convection

Temperature range (storage): -40..+85°C

Relative humidity (operation): max. 95% non-condensing

Relative humidity (storage): max. 95% non-condensing

Altitude: -300 m to + 3,000 m

Climatic tests according to EN50155 and EN68068

Shock and vibration tested according to EN61373

IP67 compliant

Conformal coating on request

MTBF

669,843 h @ 40°C according to IEC/TR 62380 (RDF 2000)

Safety

PCBs manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to the following railway standards:
• EN50121 (radio disturbance)
• EN61000-4-2 (ESD)
• EN61000-4-3 (radiated disturbances)
• EN61000-4-4 (burst)
• EN61000-4-5 (surge)

Conforming to e1 requirements of the German Federal Motor Transport Authority

Tested according to the following automotive standards:
• CISPR25/CISPR16 (radiated emission)
• ISO7637-2 (conducted emission - power line)
• ISO7637-2 (conductive immunity - power line)
• ISO7637-3 (capacitive immunity - signal line)
• ISO11452-2, ISO11452-5 (radiation immunity)
• EN50121 (radio disturbance)

Firmware

Firmware for configuration and management included

Electrical Specifications

Other nominal input voltages: 36, 48, 72, 96 or 110 VDC
• Wide input range (according to EN50155): 0.7 x nominal voltage < nominal voltage < 1.25 x nominal voltage

Article No.	Description	More
06RS03-00	Managed, 8x 100BaseT, PSU 24/48V, -40...+70°C screened, EN50155 class Tx compliant, IP67	Photo

Article No.	Description	More
06RS04-00	Unmanaged, 8x 100BaseT, PSU 24/48V, -40..+70°C screened, EN50155 class Tx compliant, IP67	More info Photo

Article No.	Description	More
05RS01-00	DIN-Rail mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-01	Wall-mounting plate for MIPIOS® family, -40..+85°C	Photo
05RS01-02	I2C Dongle for MIPIOS® Switch, 32Kb, M12, -40..+85°C
05RS01-03	Cable set for MIPIOS® RSx and 19" rack-mountable SFx switches, consisting of: 4 Ethernet cables (M12 to RJ45), 1 service adapter (M12 to D-sub), 1 service cable, 1 dongle adapter (D-Sub to M12), 1 power cable (M12 to open end), -40..+85°C	Photo

Article No.	Description	More
Firmware/BIOS
14ETSW-00	Ethernet Switch Firmware for managed RSx, SFx and F302 models	Download Details

For operating systems not mentioned here contact MEN sales.

Article No.	Description	More
06RS03-DS	RS3 Data Sheet (PDF)	Download
20RS03-00	RS3 User Manual (PDF)	Download
21ETSW-ER	Managed Ethernet Switch Firmware Errata (PDF)	Download
21ETSW-00	Managed Ethernet Switch Quick Start Guide (PDF)	Download
21ETSW-01	Managed Ethernet Switch Command Line Interface User Manual - Command Reference (PDF)	Download