Log in/Register News & Media | Downloads | Corporate | Careers | Contact Request
 +33-450-955-312
info@men-france.fr

F19P - Intel Core 2 Duo CPU Board

3U CompactPCI PlusIO

The F19P versatile 4HP/3U single-board computer is compatible to the CompactPCI PlusIO standard and equipped with the Intel Core 2 Duo processor SP9300.

  • F19P Product ImageF19P Intel Core 2 Duo CPU Board
  • F19P Product Image

Main Features

  • Intel Core 2 Duo SP9300, 2.26 GHz<br />Dual-core 64-bit processor<br />32-bit 4HP system master (or stand-alone)<br />For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0)<br />Up to 4 GB DDR3 DRAM soldered<br />CompactFlash and microSD card slots<br />Front I/O: VGA, 2 Gb Ethernet, 2 USB<br />Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet<br />Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.<br />Board controller<br />-40°C to +85°C screened version
F19P Product Image

Technical Data

CPU
  • Intel Core 2 Duo SP9300
    • Up to 2.26 GHz processor core frequency
    • 1066 MHz system bus frequency
  • Chipset
    • Northbridge: Intel GS45
    • Southbridge: Intel ICH9M-SFF
Memory
  • Up to 6 MB L2 cache integrated in Core 2 Duo
  • Up to 4 GB DDR3 SDRAM system memory
    • Soldered
    • 800/1067 MHz memory bus frequency locked to the FSB frequency
  • 16 Mbits boot Flash
  • Serial EEPROM 2kbits for factory settings
  • CompactFlash card interface
    • Via USB
    • Type I
    • True IDE
    • DMA support
  • MicroSD card interface
    • Via USB
Mass Storage
  • CompactFlash
    • Connected via USB
  • MicroSD card
    • Connected via USB
  • Serial ATA (SATA)
    • Four channels via rear I/O, one channel via side-card connector (switchable)
    • Transfer rates up to 3 Gbit/s
    • RAID level 0/1 support
Graphics
  • Integrated in GS45 chipset
    • Up to 533 MHz graphics core
    • Maximum resolution: 2048 x 1536 pixels
  • VGA connector at front panel
  • Two SDVO ports available via side-card connector
    • Two additional DVI connectors at front panel optional via side card
    • Simultaneous connection of two monitors
I/O
  • USB
    • Two USB 2.0 ports via Type A connectors at front panel
    • Four USB 2.0 ports via side-card connector
    • Four USB 2.0 ports via rear I/O
    • One USB for connection of CompactFlash/MicroSD or USB NAND Flash
    • UHCI implementation
    • Data rates up to 480Mbit/s
  • Ethernet
    • Two 10/100/1000Base-T Ethernet channels at the front
    • RJ45 connectors at front panel
    • Ethernet controllers are connected by two x1 PCIe links from ICH9M
    • Onboard LEDs to signal activity status and connection speed
    • One 10/100/1000Base-T Ethernet channel via rear I/O
    • Ethernet controller is connected by one x1 PCIe link from GS45
  • High Definition (HD) audio
    • Accessible via side-card connector
Front Connections (Standard)
  • VGA
  • Two USB 2.0 (Type A)
  • Two Ethernet (RJ45)
Rear I/O
  • Four SATA
  • Four USB
  • One Gigabit Ethernet
  • Four PCI Express x1 links
  • Compatible with PICMG 2.30 CompactPCI PlusIO
    • 1PCI33/4PCIE2.5/4SATA3/4USB2/1ETH1G
Miscellaneous
  • Board controller
  • Real-time clock, buffered by a GoldCap or alternatively a battery (5 years life cycle)
  • Watchdog timer
  • Temperature measurement
  • One user LED
  • Reset button
PCI Express
  • Three x1 links to connect local 1000Base-T Ethernet controllers
    • Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)
  • Four x1 links for extension through side-card connector or rear I/O
    • Data rate up to 1 GB/s in each direction (2.5 Gbit/s per lane)
CompactPCI Bus
  • Compliance with CompactPCI Core Specification PICMG 2.0 R3.0
  • System slot
  • 32-bit/33-MHz CompactPCI bus
  • V(I/O): +3.3 V (+5 V tolerant)
Busless Operation
  • Board can be supplied with +5 V only, all other voltages are generated on the board
  • Backplane connectors used only for power supply
Electrical Specifications
  • Supply voltage/power consumption with Celeron M722 processor:
    • +5 V (-3%/+5%), 2.2 A typ., 2.7 A max.
    • +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
    • +12 V (-10%/+10%), approx. 10 mA
    • If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
  • Supply voltage/power consumption with SP9300 processor:
    • +5 V (-3%/+5%), 4.9 A typ., 6.4 A max.
    • +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
    • +12 V (-10%/+10%), approx. 10 mA
    • If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
Mechanical Specifications
  • Dimensions: conforming to CompactPCI specification for 3U boards
  • Front panel: 4HP with ejector
  • Weight: 430 g
Environmental Specifications
  • Temperature range (operation):
    • Depends on system configuration (CPU, hard disk, heat sink...)
    • Maximum: +85°C
    • Minimum: -40°C (all processors)
    • Conditions: airflow 1.5 m/s, typical power dissipation: 9.8 W (F19P version with Celeron M722), 13.4 W (F19P version with SP9300 Core 2 Duo) with Windows XP operating system and 1 Gb Ethernet connection
  • Temperature range (storage): -40..+85°C
  • Relative humidity (operation): max. 95% non-condensing
  • Relative humidity (storage): max. 95% non-condensing
  • Altitude: -300 m to +2,000 m
  • Shock: 50 m/s², 30 ms
  • Vibration (function): 1 m/s², 5 Hz - 150 Hz
  • Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
MTBF
552,030h @ 40°C according to IEC/TR 62380 (RDF2000)
Safety
PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers
EMC
Tested according to EN 55022 (radio disturbance), IEC 61000-4-3 (electromagnetic field immunity), IEC 61000-4-4 (burst), IEC 61000-4-5 (surge) and IEC 61000-4-6 (conducted disturbances)
BIOS
InsydeH2O UEFI Framework
Software Support
  • Note that 64-bit hardware technology can be used in an optimal way with 64-bit operating system support
  • Windows (Windows XP, Windows 7)
  • Linux
    • tested/verified with: Ubuntu 10.04 (kernel 2.6.32-21) 32-bit and 64-bit versions
    • OpenSuse 11.3 32-bit and 64-bit versions
    • and: CentOS 5.5 (kernel 2.6.18) 32-bit and 64-bit versions
    • Detailed matrix of supported interfaces under Ubuntu 10.04 and OpenSuse 11.3
  • VxWorks
  • QNX
  • Intel Virtualization Technology, allows a platform to run multiple operating systems and applications in independent partitions; one computer system can function as multiple "virtual" systems
  • For more information on supported operating system versions and drivers see Software.

Options

CPU
  • Intel SP9300, 2.26 GHz, 1066 MHz FSB, 6 MB cache, 25 W
  • Intel SL9400, 1.86 GHz, 1066 MHz FSB, 6 MB cache, 17 W
  • Intel SU9300, 1.2 GHz, 800 MHz FSB, 3 MB cache, 10 W
  • Intel Celeron M722, 1.2 GHz, 800 MHz FSB, 1 MB cache, 5.5 W
  • Intel Celeron M723, 1.2 GHz, 800 MHz FSB, 1 MB cache, 10 W
Memory
  • System RAM
    • 2 GB or 4 GB
  • CompactFlash
    • 0 MB up to maximum available
  • MicroSD card
    • 0 MB up to maximum available
  • NAND Flash instead of CompactFlash, microSD card and battery
    • 0 MB up to maximum available
Graphics
One or two DVI-D connectors at front via side card
  • Simultaneous connection of two monitors
I/O
Ethernet
  • 9-pin D-Sub connector with one or two 10/100Base-T ports instead of two RJ45 connectors
  • Two M12 connectors with two 10/100/1000Base-T ports on 8HP instead of two RJ45 connectors
Mechanical
  • Side card can be added at left or right side of CPU
  • Adapter board for two M12 Ethernet connectors can be added at left or right side of CPU
Operation Temperature
  • Depends on system configuration (CPU, hard disk, heat sink...)
  • Maximum: +85°C
  • Minimum: -50°C
Cooling Concept
Also available with conduction cooling in MEN CCA frame
Some of these options may only be available for large volumes.
Please ask our sales staff for more information.
Contact Request! Use this form to get the fastest possible reply.
Please make sure to fill out the complete form, so we can provide quick and specific support.
Your request will be sent to our sales team.

Your information will not be shared!

* required fields

Your Request

Your Contact Data

Please type in the letters and/or numbers that you see in the image on the left (case-sensitive).