Follow Us
F19P - Intel Core 2 Duo CPU Board
3U CompactPCI PlusIO
This product has been discontinued.The F19P versatile 4HP/3U single-board computer is compatible to the CompactPCI PlusIO standard and equipped with the Intel Core 2 Duo processor SP9300.
F19P Intel Core 2 Duo CPU Board
Main Features
- Intel Core 2 Duo SP9300, 2.26 GHz
- Dual-core 64-bit processor
- 32-bit 4HP system master (or stand-alone)
- For CompactPCI 2.0 systems or CompactPCI PlusIO 2.30 hybrid systems (2.0 and CPCI-S.0)
- Up to 4 GB DDR3 DRAM soldered
- CompactFlash and microSD card slots
- Front I/O: VGA, 2 Gb Ethernet, 2 USB
- Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gb Ethernet
- Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.
- Board controller
- -40°C to +85°C screened version
Technical Data
- Intel Core 2 Duo SP9300
- Up to 2.26 GHz processor core frequency
- 1066 MHz system bus frequency
- Chipset
- Northbridge: Intel GS45
- Southbridge: Intel ICH9M-SFF
- Up to 6 MB L2 cache integrated in Core 2 Duo
- Up to 4 GB DDR3 SDRAM system memory
- Soldered
- 800/1067 MHz memory bus frequency locked to the FSB frequency
- 16 Mbits boot Flash
- Serial EEPROM 2kbits for factory settings
- CompactFlash card interface
- Via USB
- Type I
- True IDE
- DMA support
- MicroSD card interface
- Via USB
- CompactFlash
- Connected via USB
- MicroSD card
- Connected via USB
- Serial ATA (SATA)
- Four channels via rear I/O, one channel via side-card connector (switchable)
- Transfer rates up to 3 Gbit/s
- RAID level 0/1 support
- Integrated in GS45 chipset
- Up to 533 MHz graphics core
- Maximum resolution: 2048 x 1536 pixels
- VGA connector at front panel
- Two SDVO ports available via side-card connector
- Two additional DVI connectors at front panel optional via side card
- Simultaneous connection of two monitors
- USB
- Two USB 2.0 ports via Type A connectors at front panel
- Four USB 2.0 ports via side-card connector
- Four USB 2.0 ports via rear I/O
- One USB for connection of CompactFlash/MicroSD or USB NAND Flash
- UHCI implementation
- Data rates up to 480Mbit/s
- Ethernet
- Two 10/100/1000Base-T Ethernet channels at the front
- RJ45 connectors at front panel
- Ethernet controllers are connected by two x1 PCIe links from ICH9M
- Onboard LEDs to signal activity status and connection speed
- One 10/100/1000Base-T Ethernet channel via rear I/O
- Ethernet controller is connected by one x1 PCIe link from GS45
- High Definition (HD) audio
- Accessible via side-card connector
- VGA
- Two USB 2.0 (Type A)
- Two Ethernet (RJ45)
- Four SATA
- Four USB
- One Gigabit Ethernet
- Four PCI Express x1 links
- Compatible with PICMG 2.30 CompactPCI PlusIO
- 1PCI33/4PCIE2.5/4SATA3/4USB2/1ETH1G
- Board controller
- Real-time clock, buffered by a GoldCap or alternatively a battery (5 years life cycle)
- Watchdog timer
- Temperature measurement
- One user LED
- Reset button
- Three x1 links to connect local 1000Base-T Ethernet controllers
- Data rate 250 MB/s in each direction (2.5 Gbit/s per lane)
- Four x1 links for extension through side-card connector or rear I/O
- Data rate up to 1 GB/s in each direction (2.5 Gbit/s per lane)
- Compliance with CompactPCI Core Specification PICMG 2.0 R3.0
- System slot
- 32-bit/33-MHz CompactPCI bus
- V(I/O): +3.3 V (+5 V tolerant)
- Board can be supplied with +5 V only, all other voltages are generated on the board
- Backplane connectors used only for power supply
- Supply voltage/power consumption with Celeron M722 processor:
- +5 V (-3%/+5%), 2.2 A typ., 2.7 A max.
- +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
- +12 V (-10%/+10%), approx. 10 mA
- If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
- Supply voltage/power consumption with SP9300 processor:
- +5 V (-3%/+5%), 4.9 A typ., 6.4 A max.
- +3.3 V (-3%/+5%), 1.4 A (2 Gb Ethernet), 1 A (1 Gb Ethernet)
- +12 V (-10%/+10%), approx. 10 mA
- If the board is supplied with 5 V only (typically without a bus connection), the 3.3 V are generated on the board and fed to the backplane (3 A max.)
- Dimensions: conforming to CompactPCI specification for 3U boards
- Front panel: 4HP with ejector
- Weight: 430 g
- Temperature range (operation):
- Depends on system configuration (CPU, hard disk, heat sink...)
- Maximum: +85°C
- Minimum: -40°C (all processors)
- Conditions: airflow 1.5 m/s, typical power dissipation: 9.8 W (F19P version with Celeron M722), 13.4 W (F19P version with SP9300 Core 2 Duo) with Windows XP operating system and 1 Gb Ethernet connection
- Temperature range (storage): -40..+85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to +2,000 m
- Shock: 50 m/s², 30 ms
- Vibration (function): 1 m/s², 5 Hz - 150 Hz
- Vibration (lifetime): 7.9 m/s², 5 Hz - 150 Hz
- Note that 64-bit hardware technology can be used in an optimal way with 64-bit operating system support
- Windows (Windows XP, Windows 7)
- Linux
- tested/verified with: Ubuntu 10.04 (kernel 2.6.32-21) 32-bit and 64-bit versions
- OpenSuse 11.3 32-bit and 64-bit versions
- and: CentOS 5.5 (kernel 2.6.18) 32-bit and 64-bit versions
- Detailed matrix of supported interfaces under Ubuntu 10.04 and OpenSuse 11.3
- VxWorks
- QNX
- Intel Virtualization Technology, allows a platform to run multiple operating systems and applications in independent partitions; one computer system can function as multiple "virtual" systems
- For more information on supported operating system versions and drivers see Software.
Options
- Intel SP9300, 2.26 GHz, 1066 MHz FSB, 6 MB cache, 25 W
- Intel SL9400, 1.86 GHz, 1066 MHz FSB, 6 MB cache, 17 W
- Intel SU9300, 1.2 GHz, 800 MHz FSB, 3 MB cache, 10 W
- Intel Celeron M722, 1.2 GHz, 800 MHz FSB, 1 MB cache, 5.5 W
- Intel Celeron M723, 1.2 GHz, 800 MHz FSB, 1 MB cache, 10 W
- System RAM
- 2 GB or 4 GB
- CompactFlash
- 0 MB up to maximum available
- MicroSD card
- 0 MB up to maximum available
- NAND Flash instead of CompactFlash, microSD card and battery
- 0 MB up to maximum available
- Simultaneous connection of two monitors
- 9-pin D-Sub connector with one or two 10/100Base-T ports instead of two RJ45 connectors
- Two M12 connectors with two 10/100/1000Base-T ports on 8HP instead of two RJ45 connectors
- Side card can be added at left or right side of CPU
- Adapter board for two M12 Ethernet connectors can be added at left or right side of CPU
- Depends on system configuration (CPU, hard disk, heat sink...)
- Maximum: +85°C
- Minimum: -50°C
Ordering Information
CompactPCI 3U 1-slot backplane for stand-alone operation of F14, F15, F17, F18, F19P, F21P, F22P, F23P: 32-bit/33-MHz with rear I/O, 3.3V supply, ATX-power, power, JTAG, IPMB and utility connection, 6x screw connection M3
Extension board to adapt 3U CompactPCI or CompactPCI Serial (CPCI-S.0) boards to 6U format; for evaluation purposes
3U CompactPCI side card with 2 USB and 1 COM extension, SATA hard disk and CompactFlash slot, for F14 and compatible SBCs, mounted to the right of the SBC, 0..+60°C
Details
2 Gigabit Ethernet on Lemo railway compliant connectors, 1 COM extension (SA-Adapter not included), SATA hard disk slot, for F14 and compatible SBCs, conformally coated, -40...+85°C screened
Details
CompactPCI PlusIO rear transition module 3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe x1, -40°C..+85°C qualified
DetailsCompactFlash card, 4 GB, Type I, fixed bit set, -40 to +85°C
MicroSD card, 4 GB, -40°C to +85°C
CompactFlash card, 16 GB, -40 to +85°C
CompactFlash card, 2 GB, Type I, fixed bit set, -40 to +85°C
CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 4+4-slot 3U CompactPCI / CompactPCI Serial hybrid backplane, prepared for rear I/O, 250W power supply wide range 90..264VAC on rear, 1U fan tray with 2 fans included, 0..+60°C
DetailsMEN delivers turn-key systems completely installed (hardware, operating system, accessories), wired and tested. Different rack sizes, power supplies and backplanes on request.
For details please contact your local sales representative.
Software
Linux MDIS5 low-level driver sources (MEN) for generic SMBus driver
MDIS5 System (and Device Driver) Package (MEN) for Linux. This software package includes most standard device drivers available from MEN.
Windows Windows 32-bit network driver (Intel) for XM1, XM1L, XM2, MM2, CB70C, F11S, F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, SC24, BC50I, BC50M, BL50W, BL50S, BL70W, BL70S, DC15 and DC17
Windows Embedded Standard 7 BSP
Windows Installset (MEN) for XM2 and F19P
Windows 64-bit network driver (Intel) for F18, F18E, F19P, F21P, F22P, F23P, G20, G22, G23, G25A, GM1, GM2, GM3, G211, G211F, XM2, CB70C, SC24, BC50I, BC50M, BL50W, BL50S, BL70W, BL70S, DC15 and DC17
Windows graphics driver (Intel) for XM2 and F19P
Windows HD Audio driver (Realtek) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9 and A19
Windows USB2UART driver (FTDI) for F14, F15, F17, F18, F19P, F21P, F22P, F23P, D9, A19, A20, XM2 and XM50 / XM51 / F50P / F50C hosts
Windows chipset driver (Intel) for F14, F15, F17, F18, F18E, F19P, F21P, F22P, G20, G22, XM2, CB70C, D9, D6, D7, D601, A19 and A20
Windows XP Embedded BSP (MEN) for F11S, F14, F15, F17, F18, F19P, F21P, G20, XM1, XM1L, XM2, MM1, MM2, DC1, DC2, DC13, RC1, BC50I, BC50M, BL50W and BL50S
VxWorks MDIS5 low-level driver sources (MEN) for generic SMBus driver
MDIS5 low-level driver sources (MEN) for LM63 on SMBus for F14, F15, F17, F18, F19P, D9, D601, A19 and A20
MDIS5 low-level driver sources (MEN) for board management controller on MEN Intel CPUs
VxWorks 6.7 BSP (MEN) for F19P
VxWorks 6.9 BSP (MEN) for F19P
QNX MDIS5 low-level driver sources (MEN) for generic SMBus driver
MDIS5 low-level driver sources (MEN) for LM63 on SMBus for F14, F15, F17, F18, F19P, D9, D601, A19 and A20
MDIS5 low-level driver sources (MEN) for board management controller on MEN Intel CPUs
QNX 6.3.0 installation support files (QNX and MEN) for F14, F15, F17, F18, F19P, XM1, XM2 and MM1
QNX 6.5.0 BSP (QNX and MEN) for F19P and XM2
QNX 6.4.0 BSP (QNX and MEN) for F19P and XM2
System BIOS for F19P
Intel software development products such as analyzers, compilers, threading tools etc. can be downloaded under www.intel.com/cd/software/products/asmo-na/eng/index.htm.
IA-32 Intel Architecture Software Developer's Manuals are available under www.intel.com/products/processor/manuals/index.htm.
Documentation
Product Compare Chart: 3U CompactPCI/PlusIO Extension Cards
Product Compare Chart: 3U CompactPCI/PlusIO Peripheral Cards
Product Compare Chart: 3U CompactPCI Serial Boards
Product Compatibility Matrix: CompactPCI/PlusIO CPU Boards and Side Cards
Overview Chart: F19P/XM2 Supported Interfaces under Linux