Contact Us

F602 - CompactPCI Express Side Card

3U CompactPCI

This product has been discontinued.

The F602 is a 4HP CompactPCI Express extension card for 3U Intel-based CompactPCI single-board computers. It can be used in combination with the F14, F15, F17 and F18 CPU boards.

Download data sheet

F602 side card configuration example (CompactPCI Express)

Main Features

4 HP extension for 3U Intel SBCs F14, F15, F17, F18
4 PCI Express links x1 to backplane
1 COM via SA-Adapter
1 USB 2.0
1 DVI connection
2.5" SATA hard-disk slot

Technical Data

CompactPCI Express

Compliance with CompactPCI Express PICMG EXP.0 R1.0 Specification
CompactPCI Express connector XP1 for power supply
CompactPCI Express connectors XJ2 and XJ3 for 4 CompactPCI Express links with 1 lane each
- CPU board F14 only supports 2 or 3 CompactPCI Express links with 1 lane each
CompactPCI Express connector XJ4 for control signals and ground

I/O

DVI
- One DVI-D connector at front panel
- SDVO PanelLink transmitter
- Maximum resolution: 1600 x 1200 pixels
- 60Hz refresh rate
- Dual monitor support
USB
- One USB 2.0 port
- Type A connector at front panel
- UHCI implementation
- Data rates up to 480Mbit/s
- High current up to 1A
UART
- One at front panel
- Physical interface using SA-Adapter via 10-pin connector
- RS232..RS422, isolated or not
- Only full duplex operation for RS422
- Data rates up to 1 Mbit/s
- FIFO receive and transmit buffers for high data throughput
- Handshake lines: full support; lines depend on SA-Adapters

Mass Storage

Serial ATA (SATA)

One port for onboard 2.5" hard-disk drive
Transfer rates up to 150MB/s (depends on hard disk)
RAID level 0/1 support (depends on CPU board)

Electrical Specifications

Supply voltage/power consumption:
- +5V (-3%/+5%), tbd typ. (w/o hard disk)
- +3.3V (-3%/+5%), tbd typ. (w/o hard disk)
MTBF: 1,861,103h @ 40°C according to IEC/TR 62380 (RDF 2000)

Mechanical Specifications

Dimensions: conforming to CompactPCI specification for 3U boards
Mountable on right side of the CPU
Weight: 150g (w/o hard disk)

Environmental Specifications

Temperature range (operation):
- 0..+60°C up to -40..+85°C (depending on hard disk; please refer to the hard disk specifications for possible limits)
- Airflow: min. 10m³/h
Temperature range (storage): -40..+85°C
Relative humidity (operation): max. 95% non-condensing
Relative humidity (storage): max. 95% non-condensing
Altitude: -300m to + 3,000m
Shock: 15g/11ms
Bump: 10g/16ms
Vibration (sinusoidal): 2g/10..150Hz

Safety

PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers

EMC

Tested according to EN 55022 (radio disturbance), IEC 61000-4-2 (ESD) and IEC 61000-4-4 (burst)

Software Support

Driver software can be found in the data sheet of the CPU board that you use.