Follow Us
GE1 - 4-Port Gigabit Copper Ethernet Line Card with PoE
3U CompactPCI Serial
The GE1 is a 3U Gigabit Ethernet line card, with optional PoE support, implemented as a CompactPCI Serial board. It occupies one peripheral slot using a 4 HP front panel with four Gigabit Ethernet ports on RJ45 connectors. Alternatively, the GE1 can be supplied with four M12 connectors on the front panel (X-coded variants in preparation)
GE1 Gigabit copper Ethernet line card with RJ45 connectors
GE1 Gigabit copper Ethernet line card with M12 connectors
GE1 Gigabit copper Ethernet line card
NH30 - Rugged 4U, 40 HP Modular Managed Gigabit Ethernet Switch
Main Features
- 4 Gigabit Ethernet on RJ45 connectors (M12 optional)
- Power over Ethernet (PoE+) PSE (all ports)
- LEDs for link and activity status
- -40 to +85°C with qualified components
- EN 50155 classTx (railways)
- PICMG CPCI-S.0 CompactPCI Serial peripheral card (limited mechanical compliance)
- IEEE 1588v2 supported (together with G101)
Technical Data
- Four 10/100/1000BASE-T ports at front panel (Electrical isolation: 1500 Vrms)
- One common isolation group when PoE PSE is installed
- Optional PoE(+) Power sourcing support
- Port configuration: copper, 10/100 and 1000 MBit/s
- IEEE 1588v2 (together with G101)
- IEEE 802.3 Standard
- Power over Ethernet support (IEEE 802.3 Section 2, Type 1 and 2 - classes 0, 1, 2, 3, 4)
- EEE (Energy Efficient Ethernet)
- PSE (Power Sourcing Equipment) function
- Supports supply classes 0 to 4
- Supplies up to four powered devices (up to 60 W total)
- Ethernet
- Four RJ45 or M12 A-coded connectors, 1000BASE-TX (1 Gbit/s)
- Power over Ethernet PSE
- Status LEDs
- Two LEDs for each port
- Signal link status
- Signal link activity
- Serial GPIO (SGPIO)
- PoE Control
- Four Ethernet links on P6
- BITE Voltage Supervision
- PoE Voltage monitoring
- Peripheral slot
- Supply voltages
- +12 V (±10%)
- Power consumption
- 5 W without PoE support, 85 W max. with 60 W PoE
- Dimensions: 3U, 4 HP
- Weight: 204 g
- Temperature range (operation):
- -40°C to +85°C
- Airflow 1.5m/s
- Temperature range (storage): -40°C to +85°C
- Relative humidity (operation): max. 95% non-condensing
- Relative humidity (storage): max. 95% non-condensing
- Altitude: -300 m to +2000 m
- Shock: 50 m/s², 30 ms
- Vibration (Function): 1 m/s², 5 Hz to 150 Hz (EN 61373)
- Vibration (Lifetime): 7.9 m/s², 5 Hz to 150 Hz (EN 61373)
- Flammability (PCBs)
- UL 94 V-0
- Electrical Safety
- EN 50155 (Insulation)
- EN 50155 (Voltage)
- EN 55022 (radio disturbance)
- EN 61000-4-2 (ESD Immunity)
- EN 61000-4-4 (burst)
Ordering Information
3U CompactPCI Serial, 4 x RJ45 passive Ethernet port extender, no PoE, -40 to +85°C
This product can be ordered until 2019-03-303U CompactPCI Serial, 4 x RJ45 passive Ethernet port extender, PoE+, -40 to +85°C
This product can be ordered until 2019-03-303U CompactPCI Serial, 4 x M12 passive Ethernet port extender, no PoE, -40 to +85°C, conformal coated
This product can be ordered until 2019-03-303U CompactPCI Serial, 4 x M12 passive Ethernet port extender with PoE+, -40 to +85°C, conformal coated
This product can be ordered until 2019-03-30
25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 1 management firmware, -40 °C to +85 °C
Details 25-port managed Gigabit Ethernet switch, 2x RJ45 + 1x SFP 2.5 Gbit/s on front, 10x Gb Ethernet + 3x QSGMII, Gen 2 management firmware, -40 °C to +85 °C
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 1 management firmware, -40 °C to +85 °C, conformal coating
Details 24-port managed Gigabit Ethernet switch, 3x M12 A-coded on front, 9x Gb Ethernet + 3x QSGMII on backplane, Gen 2 management firmware, -40 °C to +85 °C, conformal coating
Details
3U CompactPCI Serial, 4 x RJ45 QSGMII port extender, no PoE, EEE and Sync-E support, -40 to +85°C
Details 3U CompactPCI Serial, 4 x RJ45 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C
Details 3U CompactPCI Serial, 4 x M12 QSGMII port extender, no PoE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details 3U CompactPCI Serial, 4 x M12 QSGMII port extender, PoE+ PSE, EEE and Sync-E support, -40 to +85°C, conformal coated
Details
3U CompactPCI Serial, QSGMII to 4 x SFP 1GB port extender EEE and Sync-E support, -40 to +85°C
Details
4x M12 X-coded QSGMII Gigabit Ethernet line card for CompactPCI Serial Switches G101 and G102, no PoE, EEE and SyncE support, -40 to +85°C with qualified components, conformal coated
Details
NH30, 19" 4U/40HP modular managed Gigabit Ethernet Switch, -40 to +85°C
The NH30 is a build-to-order system. It consists of the 40 HP basic system including backplane and mounting rails and provides:
- 2 PSU slots
- 1 CompactPCI Serial based system slot (Switch Board)
- 6 CompactPCI Serial based peripheral slots
- All peripheral slots are capable of supporting a mix of various types of connectors (RJ45, M12, SFP)
- All peripheral slots offer additional PoE+ support
The boards and accessories listed in the Technical Data can be implemented in the system.
Choose the functionality you need using the BTO configurator and the BTO Configuration Guide.
Contact MEN's sales team for more information.