Follow Us
14EM09-00 - MENMON (Firmware) (MEN) for EM9, EM9A and EK9 (object code)
MENMON (Firmware) (MEN) for EM9, EM9A and EK9 (object code)
Download 14EM09-00_01_04.zipiSecondary MENMON binary for EM9 and EK9 1.4 29.05.2008 15:37:45 by rt
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Download 14EM09-00_01_09.zipiSecondary MENMON binary for EM9A 1.9 25.11.2009 14:09:18 by rt
added:
-Support for 15EM09A01.
1.8 27.05.2009 18:01:12 by rt
-No changes for EM09
1.7 18.11.2008 17:38:34 by rt
added:
-Support for Flash locking (MenMon unlocks the flash before update
and restores the old flash locking after the update).
fixed:
-USB Philips 1561 start-up bugfix was not working anymore.
-EE-STARTUP parameter was not available if EE-USEFLPAR was set to 1
(EE-MMSTARTUP was always available).
1.6 05.08.2008 16:37:17 by rt
changed:
-smbBus parameter added to EER-... commands (to support more than one SMB bus)
1.5 25.06.2008 18:10:50 by rt
added:
-Give hint to user if eeprom parameter change needs reset to take effect
-Support for SiI3114 SATA controller
-DIAG USB_CB for EC01 carrier board USB port (EK09 kit)
changed:
-"USBT" command lists all USB busses per default now
fixed:
-Wrong bus no. if "USBT" is called without calling "USB" before
-MenMon hang-up if "USBT" is called without calling "USB"
-Under some special circumstances files listed in program update menu
may have wrong file name
1.4 29.05.2008 15:37:45 by rt
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Download 14EM09-00_01_10.zipiSecondary MENMON binary for EM9 1.10 2011-01-26 17:57:24 by rt
R: 1) New board 15EM09-04.
2) DDR2 refresh rate may be to short for industrial temp range.
3) A defect PCI device may hang-up the board at start-up even if it's not
explicit used.
4) Parameter HALT not evalutated for linux boot
5) Others
M: 1) PORT_DramStart changed.
2) Changed DDR2 refresh rate from 7.9 us to 3.8 us.
3) Forbid accesses to PCI prefetchable area caused by speculativ execution
(set guarded bit).
4) Added parameter HALT for MMBIOS_PpcBoot
5) Sysparam and Chameleon libs updated.
1.9 25.11.2009 14:09:18 by rt
added:
-Support for 15EM09A01.
1.8 27.05.2009 18:01:12 by rt
-No changes for EM09
1.7 18.11.2008 17:38:34 by rt
added:
-Support for Flash locking (MenMon unlocks the flash before update
and restores the old flash locking after the update).
fixed:
-USB Philips 1561 start-up bugfix was not working anymore.
-EE-STARTUP parameter was not available if EE-USEFLPAR was set to 1
(EE-MMSTARTUP was always available).
1.6 05.08.2008 16:37:17 by rt
changed:
-smbBus parameter added to EER-... commands (to support more than one SMB bus)
1.5 25.06.2008 18:10:50 by rt
added:
-Give hint to user if eeprom parameter change needs reset to take effect
-Support for SiI3114 SATA controller
-DIAG USB_CB for EC01 carrier board USB port (EK09 kit)
changed:
-"USBT" command lists all USB busses per default now
fixed:
-Wrong bus no. if "USBT" is called without calling "USB" before
-MenMon hang-up if "USBT" is called without calling "USB"
-Under some special circumstances files listed in program update menu
may have wrong file name
1.4 29.05.2008 15:37:45 by rt
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Licensing Information
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Download 14EM09-00_01_09.zipiSecondary MENMON binary for EM9A 1.9 25.11.2009 14:09:18 by rt
added:
-Support for 15EM09A01.
1.8 27.05.2009 18:01:12 by rt
-No changes for EM09
1.7 18.11.2008 17:38:34 by rt
added:
-Support for Flash locking (MenMon unlocks the flash before update
and restores the old flash locking after the update).
fixed:
-USB Philips 1561 start-up bugfix was not working anymore.
-EE-STARTUP parameter was not available if EE-USEFLPAR was set to 1
(EE-MMSTARTUP was always available).
1.6 05.08.2008 16:37:17 by rt
changed:
-smbBus parameter added to EER-... commands (to support more than one SMB bus)
1.5 25.06.2008 18:10:50 by rt
added:
-Give hint to user if eeprom parameter change needs reset to take effect
-Support for SiI3114 SATA controller
-DIAG USB_CB for EC01 carrier board USB port (EK09 kit)
changed:
-"USBT" command lists all USB busses per default now
fixed:
-Wrong bus no. if "USBT" is called without calling "USB" before
-MenMon hang-up if "USBT" is called without calling "USB"
-Under some special circumstances files listed in program update menu
may have wrong file name
1.4 29.05.2008 15:37:45 by rt
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Download 14EM09-00_01_10.zipiSecondary MENMON binary for EM9 1.10 2011-01-26 17:57:24 by rt
R: 1) New board 15EM09-04.
2) DDR2 refresh rate may be to short for industrial temp range.
3) A defect PCI device may hang-up the board at start-up even if it's not
explicit used.
4) Parameter HALT not evalutated for linux boot
5) Others
M: 1) PORT_DramStart changed.
2) Changed DDR2 refresh rate from 7.9 us to 3.8 us.
3) Forbid accesses to PCI prefetchable area caused by speculativ execution
(set guarded bit).
4) Added parameter HALT for MMBIOS_PpcBoot
5) Sysparam and Chameleon libs updated.
1.9 25.11.2009 14:09:18 by rt
added:
-Support for 15EM09A01.
1.8 27.05.2009 18:01:12 by rt
-No changes for EM09
1.7 18.11.2008 17:38:34 by rt
added:
-Support for Flash locking (MenMon unlocks the flash before update
and restores the old flash locking after the update).
fixed:
-USB Philips 1561 start-up bugfix was not working anymore.
-EE-STARTUP parameter was not available if EE-USEFLPAR was set to 1
(EE-MMSTARTUP was always available).
1.6 05.08.2008 16:37:17 by rt
changed:
-smbBus parameter added to EER-... commands (to support more than one SMB bus)
1.5 25.06.2008 18:10:50 by rt
added:
-Give hint to user if eeprom parameter change needs reset to take effect
-Support for SiI3114 SATA controller
-DIAG USB_CB for EC01 carrier board USB port (EK09 kit)
changed:
-"USBT" command lists all USB busses per default now
fixed:
-Wrong bus no. if "USBT" is called without calling "USB" before
-MenMon hang-up if "USBT" is called without calling "USB"
-Under some special circumstances files listed in program update menu
may have wrong file name
1.4 29.05.2008 15:37:45 by rt
fixed:
- Flash update problem (layout revision 00):
LGTA is disabled before local bus speed-up now (no pull-up is
connected at LGTA signal -> access may be terminated earlier
than expected).
1.3 09.05.2008 17:06:02 by rt
-No changes for EM09
1.2 29.04.2008 19:07:51 by rt
added:
- support for FAT32
- support for zip compressed bootfiles (with CRC protection; see "HELP DBOOT")
- "fpga" parameter to MenMon Parameter String to tell OS which FPGA image
has been loaded
- DIAG FRAM test (quick FRAM connection test for POST)
- "CONS-BAUD" command to change baudrate immediatly (without the need of
a system reset)
- 15EM09-00: support UHCI USB controller located at EC01
- 15EM09-01: DIAG FUBU_POST (function buttons; prints just a warning if I2C
controller missing and resumes OS boot)
fixed:
- wrong number of sectors to distinguish between FAT12 and FAT16
- support for long bootfile names with ee-vxbline
- Baudrate settings for 16Z125 FPGA UARTs are more accurate now
- 15EM09-01: DIAG CAN changed to support all available test boxes (A_3200 and
A_3201)
changed:
- debug LED behaviour (e.g. heartbeat LED signals status code now; it's
possible to distinguish MenMon from OS heartbeat now)
1.1beta 09.01.2008 14:30:59 by rt
fixed:
-clear PLD reset cause
-In some cases file with long file name could not be found by
DBOOT, PGM... commands
changed:
-added random delay to ARP requests
1.0 07.12.2007 18:39:32 by rt
Initial release
Licensing Information
Supported MEN Standard Products
Included Documentation
- IMPORTANT: You can find detailed installation instructions in the EM9/EM9A User Manual!
- Please refer to the EM9/EM9A user manual (Chapter MENMON) for a product-specific, detailed description of MENMON.
Licensing Information
This article is free of charge.
Ordering Information & Downloads
Main Software
14EM09-00
MENMON (Firmware) (MEN) for EM9, EM9A and EK9 (object code)